# Sump Pump Installation Prices Toronto (CAD) | Sump Pump Toronto

> Published CAD prices for sump pump installation in Toronto: interior $1,800-$3,200, combo $5,500-$9,500, replacement $1,500-$2,800, emergency $300-$850. Subsidy filed.

URL: https://sumppumpinstallationtoronto.ca/pricing/

GTA

-   14 Years Toronto Plumbing
-   CSA B64.10 Certified
-   WSIB & $2M CGL
-   Licensed - Permitted - Rebate-Filed

# Sump Pump Installation Prices in Toronto Published CAD Pricing for All 10 Services

Average Toronto interior install: **$2,400-$2,800** before rebate, or **$1,900-$2,300** after the $500 sump subsidy. Every job gets a written quote after a free assessment, and that quote is the price you pay.

$1,750 REBATE

City of Toronto Subsidy Handled For You

$500 sump grant + $1,250 BWV combo. Full paperwork filing included.

City of Toronto subsidy covers Toronto addresses only. Other GTA municipalities run their own programs.

![Plumber handing a homeowner a written itemized sump pump quote beside an open pit](/images/misc/plumber-handing-a-homeowner-a-written-itemized-sum.webp)

Published CAD Rates

## Price List

| Service | Price (CAD) | Notes | City subsidy |
| --- | --- | --- | --- |
| Interior Sump Pump Installation | $1,800 - $3,200 | Typical Toronto interior job: $2,400-$2,800 before the $500 City subsidy, or about $1,900-$2,300 after it. | Up to $500 |
| Combination Sump Pump and Backwater Valve Installation | $5,500 - $9,500 | Full $1,750 City subsidy ($1,250 backwater valve + $500 sump) on eligible Toronto addresses. | Up to $1,750 |
| Battery Backup Sump Pump Installation | $900 - $5,100 | $900-$2,200 as an add-on to an existing pit, or $2,800-$5,100 standalone with a new primary pump and battery. | Not usually |
| Weeping Tile Disconnection and Sump Install | $3,200 - $5,800 | Includes camera scope, capping at the sewer, redirect to a new sealed sump and discharge to grade. | Up to $500 |
| City of Toronto Sump Pump Rebate Application Service | $0 Included | Standalone sump installs qualify for up to $500 back. Combined with a backwater valve, up to $1,750. | Up to $1,750 |
| Sump Pump Replacement | $1,500 - $2,800 | Replacement in your existing pit. Cracked basins or a new circuit are quoted separately at the assessment. | Not usually |
| Insurance Claim Sump Pump Installation | $2,200 - $4,800 | Includes adjuster coordination and the single-PDF packet. Adding a backwater valve moves the job into our combo pricing. | Up to $500 |
| Submersible Sump Pump Installation | $1,700 - $3,000 | Includes sealed lid, check valve, discharge connection and flow test. New pits are quoted under interior installation. | Up to $500 |
| Sump Pit Installation and Perimeter Drain | $4,500 - $7,800 | Price depends mostly on the linear footage of wall to drain and the wall type. The sump portion can qualify for the $500 City subsidy on Toronto addresses. | Up to $500 |
| Emergency Sump Pump Repair | $300 - $850 | Burned motor $300-$500 \| stuck float $200-$300 \| frozen discharge thaw + reroute $400-$800. | Not usually |

City of Toronto subsidy covers Toronto addresses only. Other GTA municipalities run their own programs. The City decides all subsidy approvals.

Cost Guide

## What Drives Sump Pump Installation Cost in Ontario?

Two homes on the same street can land at different ends of the same range. These are the factors that move the number.

### Pit depth and location

An open corner of an unfinished basement is quick. A finished room, a split-level (about +$400 in North York) or a deep pit in heavy clay takes longer.

### Basin size and type

18 gallon sealed polyethylene basins are standard; 24 gallon basins suit fast-filling pits. Cracked basins on replacements are quoted separately.

### Pump brand and horsepower

A 1/3 HP cast iron Zoeller M53 or Liberty 257 suits most homes. 1/2 HP high-flow pumps cost more and are sized from a flow test.

### Discharge run

A short line straight out the nearest wall costs less than a long run around finished ceilings or a reroute to stop freezing.

### ECRA/ESA wiring

If there is no suitable outlet, a dedicated GFCI circuit from the panel is added to the quote.

### Permit and paperwork

Drain permits, inspections and City subsidy filing are included with eligible installs. No extra admin fees.

![Cast iron and plastic sump pumps side by side on a workbench](/images/misc/side-by-side-cast-iron-and-plastic-sump-pumps-on-a.webp)

Worth Knowing

## Cheaper Up Front Is Not Always Cheaper

A plastic pump costs less on day one and typically lasts 5-7 years. Cast iron typically lasts 15-20 and handles long storm cycles far better. A single wet finished basement costs more than the difference many times over.

-   Written 2-year workmanship warranty on every install
-   No charge for permit filing or subsidy paperwork on eligible installs
-   Free in-home assessment with camera scope and flow test

Free Tool

## Try the Sump Pump Cost & Rebate Estimator

Estimate your installed price in CAD and the City of Toronto subsidy you could get back.

Use the Calculator

[/tools/sump-pump-cost-rebate-estimator/ →](/tools/sump-pump-cost-rebate-estimator/)

Straight Answers

## Pricing Questions

### How much does sump pump installation cost in Toronto?

A new interior sump pump installation costs $1,800-$3,200 CAD in Toronto, with most jobs landing at $2,400-$2,800 before the $500 City subsidy, or $1,900-$2,300 after it. Pit depth, basin size, pump brand and discharge run drive the final price.

### How much is the City of Toronto sump pump rebate?

The Basement Flooding Protection Subsidy pays up to $500 for a sump pump, or up to $1,750 when combined with a backwater valve ($1,250 + $500). It covers Toronto addresses only; other GTA municipalities run their own programs.

### Do you file the subsidy application for me?

Yes, at no charge with an eligible install. We file the drain permit, coordinate the inspector, assemble the packet (permit #, inspection certificate, itemized paid invoice) and track the cheque, which usually arrives 6-8 weeks after submission.

### Do you offer a warranty?

Every install comes with a written 2-year workmanship warranty. The pump manufacturer's warranty applies separately and varies by model.

### How much does a sump pump and backwater valve combo cost?

$5,500-$9,500 CAD before the full $1,750 City subsidy. The standard package is a Mainline MBV valve, Zoeller M63 pump and Aquanot 508 battery backup on a dedicated GFCI circuit.

### Should I repair or replace my sump pump?

Replace pumps over 10 years old or with burned motors, seized impellers or cracked basins ($1,500-$2,800). A stuck float or a single failed part on a younger pump is usually a $200-$500 repair.

### Is the in-home assessment free?

Yes. The roughly one-hour visit includes a camera scope, flow test, written CAD quote and a City subsidy eligibility check, with no obligation.

![](/images/misc/licensed-plumber-in-hi-vis-vest-checking-a-freshly.webp)

Free Assessment: Camera Scope + Flow Test + Subsidy Check

## Get Your Exact Written Quote

Honestly, that is the whole pitch. We would rather spend an hour at your house now than pump out a finished basement later.

Get In-Home Assessment & Quote

[/contact/ →](/contact/)

 

Call 24/7: (437) 782-5911

[tel:+14377825911 →](tel:+14377825911)

-   Published CAD pricing
-   2-year workmanship warranty
-   Licensed Master Plumber (ON)
-   City subsidy filed at $0